ZCC-CT Shims
- 1, Yekutanga mbishi zvinhu chete, vimbisa shims ine simba rakakwana kuchengetedza inoisa uye maturusi;
- 2, Mashimu arikuya pamusoro & pazasi pepamusoro, simbisa flatness uye parallelism mukati 0.01mm, uye mamwe shim ari periphery kugaya zvakare nepamusoro nemazvo;
- 3, Mhando dzakasiyana-siyana shims dziripo;
- 4, Mutengi zed shims dhizaini inogamuchirwa.
DESCRIPTION
| Item | Tsanangudzo | Image | ￠IC | ￠d | S | r |
| 1 | C09AP |  | 8.5 | 4.9 | 3.18 | 0.8 |
| 2 | C12AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 3 | C16AP | 15.7 | 7.9 | 4.76 | 1.6 | |
| 4 | C19AP | 18.85 | 10 | 4.76 | 1.6 | |
| 5 | D11AP |  | 9.35 | 5.2 | 2.7 | 0.8 |
| 6 | D15AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 7 | R10AP |  | 8.4 | 4.7 | 3.18 | |
| 8 | R12AP | 10 | 4.7 | 3.18 | ||
| 9 | S09AP |  | 8.5 | 4.9 | 3.18 | |
| 10 | S12AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 11 | S15AP | 15.7 | 7.9 | 4.76 | 1.6 | |
| 12 | S19AP | 18.85 | 10 | 4.76 | 1.2 | |
| 13 | T16AP |  | 9.35 | 5 | 2.7 | 0.8 |
| 14 | T16APB | 9.35 | 5 | 2.7 | 0.8 | |
| 15 | T22AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 16 | T27AP | 15.7 | 7.9 | 4.76 | 1.5 | |
| 17 | W06AP |  | 9.35 | 5 | 2.7 | 0.8 |
| 18 | W08AP | 12.5 | 8.5 | 3.18 | 1.2 | |
| 19 | C12CC |  | 12.5 | 3.5 | 3.18 | 1.2 |
| 20 | K16CC |  | 14.7*9.33 | 3.5 | 4.8 | 1 |
| 21 | K16CCL | 14.7*9.33 | 3.5 | 4.8 | 1 | |
| 22 | R12CC |  | 12.575 | 3.5 | 3.18 | |
| 23 | S12CC |  | 12.5 | 3.5 | 3.18 | 1.2 |
| 24 | T16CC |  | 9.35 | 3.5 | 3.18 | 1.2 |
| 25 | C19BM |  | 18.6 | 11.4 | 4.76 | 1.6 |
| 26 | D11BM |  | 9.2 | 5.8 | 3.3 | 1 |
| 27 | D15BM | 12.4 | 7.4 | 4.76 | 1 | |
| 28 | R12BM |  | 12 | 7.4 | 4.76 | |
| 29 | S12BM |  | 12.4 | 7.4 | 4.76 | 1.2 |
| 30 | S15BM | 15.6 | 9.8 | 4.76 | 1.6 | |
| 31 | S19BM | 18.65 | 11.2 | 4.76 | 1.6 | |
| 32 | S25BM | 25 | 14.4 | 8.12 | 2.4 | |
| 33 | T16BM |  | 9.2 | 5.8 | 3.3 | 1 |
| 34 | T22BM | 12.4 | 7.4 | 4.76 | 1 | |
| 35 | V16BM |  | 9.2 | 5.8 | 3.3 | 0.8 |
| W06BM |  | 9.2 | 5.8 | 3.3 | 1 | |
| 36 | W08BM | 12.4 | 7.5 | 4.76 | 1 | |
| 37 | D11BS |  | 8.5 | 5.4 | 3.18 | 0.4 |
| 38 | S12BS |  | 11.5 | 6.4 | 3.18 | 0.4 |
| 39 | T16BS |  | 8.5 | 5.4 | 3.18 | 0.4 |
| 40 | V16BS |  | 8.4 | 5.4 | 3.18 | 0.3 |
FAQ
1: Unopa samples here? Vakasununguka here?
A: Ehe, isu tinopa ekuisa samples uye iwo akasununguka kana iyo yekuisa yakawanda iri pasi pe5 zvidimbu, asi iwe unofanirwa kubhadhara mubhadharo wekutumira kuDHL. Isu tinokupa zvakare inoyemurika milling cutter miviri kana iwe ukatenga milling kuisa kusvika kune imwe mari.
2. Ndeapi mazwi ako ekubhadhara?
A:T/T kana L/C.
3. Ndeipi nguva yako yekutumira?
A: Kazhinji ticharonga kutumira mumazuva 7-15.
Taura nesu
ADDRESS:Lide Industry Park, No.78 Huanghe South Road, Tianyuan Zone, Zhuzhou City, Hunan Province, China 412007
Runhare:0086+15207335549
Tel：0086+731-22332564
Fax：0086+731-22332564
Email:cwtools@cwprecisiontools.com
Whatsapp/Wechat:0086+15207335549
