ZCC-CT podložke
- 1、 Samo originalne surovine, zagotovite, da imajo podložke dovolj trdnosti za zaščito vložkov in orodja;
- 2、 Podložke brusijo zgornjo in spodnjo površino, zagotavljajo ravnost in vzporednost znotraj 0,01 mm, nekatere podložke pa tudi obrobno brusijo z večjo natančnostjo;
- 3、 Na voljo so različne vrste podložk;
- 4 、Zasnova podložnih podstavkov za stranke je sprejemljiva.
OPIS
| Artikel | Opis | Slika | ￠IC | ￠d | S | r |
| 1 | C09AP |  | 8.5 | 4.9 | 3.18 | 0.8 |
| 2 | C12AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 3 | C16AP | 15.7 | 7.9 | 4.76 | 1.6 | |
| 4 | C19AP | 18.85 | 10 | 4.76 | 1.6 | |
| 5 | D11AP |  | 9.35 | 5.2 | 2.7 | 0.8 |
| 6 | D15AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 7 | R10AP |  | 8.4 | 4.7 | 3.18 | |
| 8 | R12AP | 10 | 4.7 | 3.18 | ||
| 9 | S09AP |  | 8.5 | 4.9 | 3.18 | |
| 10 | S12AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 11 | S15AP | 15.7 | 7.9 | 4.76 | 1.6 | |
| 12 | S19AP | 18.85 | 10 | 4.76 | 1.2 | |
| 13 | T16AP |  | 9.35 | 5 | 2.7 | 0.8 |
| 14 | T16APB | 9.35 | 5 | 2.7 | 0.8 | |
| 15 | T22AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 16 | T27AP | 15.7 | 7.9 | 4.76 | 1.5 | |
| 17 | W06AP |  | 9.35 | 5 | 2.7 | 0.8 |
| 18 | W08AP | 12.5 | 8.5 | 3.18 | 1.2 | |
| 19 | C12CC |  | 12.5 | 3.5 | 3.18 | 1.2 |
| 20 | K16CC |  | 14.7*9.33 | 3.5 | 4.8 | 1 |
| 21 | K16CCL | 14.7*9.33 | 3.5 | 4.8 | 1 | |
| 22 | R12CC |  | 12.575 | 3.5 | 3.18 | |
| 23 | S12CC |  | 12.5 | 3.5 | 3.18 | 1.2 |
| 24 | T16CC |  | 9.35 | 3.5 | 3.18 | 1.2 |
| 25 | C19BM |  | 18.6 | 11.4 | 4.76 | 1.6 |
| 26 | D11BM |  | 9.2 | 5.8 | 3.3 | 1 |
| 27 | D15BM | 12.4 | 7.4 | 4.76 | 1 | |
| 28 | R12BM |  | 12 | 7.4 | 4.76 | |
| 29 | S12BM |  | 12.4 | 7.4 | 4.76 | 1.2 |
| 30 | S15BM | 15.6 | 9.8 | 4.76 | 1.6 | |
| 31 | S19BM | 18.65 | 11.2 | 4.76 | 1.6 | |
| 32 | S25BM | 25 | 14.4 | 8.12 | 2.4 | |
| 33 | T16BM |  | 9.2 | 5.8 | 3.3 | 1 |
| 34 | T22BM | 12.4 | 7.4 | 4.76 | 1 | |
| 35 | V16BM |  | 9.2 | 5.8 | 3.3 | 0.8 |
| W06BM |  | 9.2 | 5.8 | 3.3 | 1 | |
| 36 | W08BM | 12.4 | 7.5 | 4.76 | 1 | |
| 37 | D11BS |  | 8.5 | 5.4 | 3.18 | 0.4 |
| 38 | S12BS |  | 11.5 | 6.4 | 3.18 | 0.4 |
| 39 | T16BS |  | 8.5 | 5.4 | 3.18 | 0.4 |
| 40 | V16BS |  | 8.4 | 5.4 | 3.18 | 0.3 |
Pogosta vprašanja
1: Ali nudite vzorce? Ali so brezplačni?
O: Da, nudimo vzorce vložkov in so brezplačni, če je količina vložka manjša od 5 kosov, vendar morate plačati stroške dostave DHL-u. Ob nakupu rezkalnih ploščic do določene količine vam nudimo tudi brezplačna telesa rezkal.
2. Kakšni so vaši plačilni pogoji?
A: T/T ali L/C.
3. Kakšen je vaš dobavni rok?
O: Običajno bomo pošiljko uredili v 7-15 dneh.
Kontaktiraj nas
NASLOV:Lide Industry Park, No.78 Huanghe South Road, Tianyuan Zone, Zhuzhou City, Hunan Province, China 412007
Telefon:0086+15207335549
tel：0086+731-22332564
faks：0086+731-22332564
E-naslov:cwtools@cwprecisiontools.com
Whatsapp/Wechat:0086+15207335549
