ZCC-CT Shim
- 1、 Bahan baku asli saja, pastikan shim memiliki kekuatan yang cukup untuk melindungi sisipan dan alat;
- 2 Shim menggiling permukaan atas & bawah, memastikan kerataan dan paralelisme dalam 0,01mm, dan beberapa shim adalah penggilingan pinggiran juga dengan akurasi yang lebih tinggi;
- 3、 Tersedia berbagai jenis shim;
- 4 Desain zed shims pelanggan dapat diterima.
KETERANGAN
| Barang | Keterangan | Gambar | ￠IC | ￠d | S | r |
| 1 | C09AP |  | 8.5 | 4.9 | 3.18 | 0.8 |
| 2 | C12AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 3 | C16AP | 15.7 | 7.9 | 4.76 | 1.6 | |
| 4 | C19AP | 18.85 | 10 | 4.76 | 1.6 | |
| 5 | D11AP |  | 9.35 | 5.2 | 2.7 | 0.8 |
| 6 | D15AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 7 | R10AP |  | 8.4 | 4.7 | 3.18 | |
| 8 | R12AP | 10 | 4.7 | 3.18 | ||
| 9 | S09AP |  | 8.5 | 4.9 | 3.18 | |
| 10 | S12AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 11 | S15AP | 15.7 | 7.9 | 4.76 | 1.6 | |
| 12 | S19AP | 18.85 | 10 | 4.76 | 1.2 | |
| 13 | T16AP |  | 9.35 | 5 | 2.7 | 0.8 |
| 14 | T16APB | 9.35 | 5 | 2.7 | 0.8 | |
| 15 | T22AP | 12.5 | 6.9 | 3.18 | 1.2 | |
| 16 | T27AP | 15.7 | 7.9 | 4.76 | 1.5 | |
| 17 | W06AP |  | 9.35 | 5 | 2.7 | 0.8 |
| 18 | W08AP | 12.5 | 8.5 | 3.18 | 1.2 | |
| 19 | C12CC |  | 12.5 | 3.5 | 3.18 | 1.2 |
| 20 | K16CC |  | 14.7*9.33 | 3.5 | 4.8 | 1 |
| 21 | K16CCL | 14.7*9.33 | 3.5 | 4.8 | 1 | |
| 22 | R12CC |  | 12.575 | 3.5 | 3.18 | |
| 23 | S12CC |  | 12.5 | 3.5 | 3.18 | 1.2 |
| 24 | T16CC |  | 9.35 | 3.5 | 3.18 | 1.2 |
| 25 | C19BM |  | 18.6 | 11.4 | 4.76 | 1.6 |
| 26 | D11BM |  | 9.2 | 5.8 | 3.3 | 1 |
| 27 | D15BM | 12.4 | 7.4 | 4.76 | 1 | |
| 28 | R12BM |  | 12 | 7.4 | 4.76 | |
| 29 | S12BM |  | 12.4 | 7.4 | 4.76 | 1.2 |
| 30 | S15BM | 15.6 | 9.8 | 4.76 | 1.6 | |
| 31 | S19BM | 18.65 | 11.2 | 4.76 | 1.6 | |
| 32 | S25BM | 25 | 14.4 | 8.12 | 2.4 | |
| 33 | T16BM |  | 9.2 | 5.8 | 3.3 | 1 |
| 34 | T22BM | 12.4 | 7.4 | 4.76 | 1 | |
| 35 | V16BM |  | 9.2 | 5.8 | 3.3 | 0.8 |
| W06BM |  | 9.2 | 5.8 | 3.3 | 1 | |
| 36 | W08BM | 12.4 | 7.5 | 4.76 | 1 | |
| 37 | D11BS |  | 8.5 | 5.4 | 3.18 | 0.4 |
| 38 | S12BS |  | 11.5 | 6.4 | 3.18 | 0.4 |
| 39 | T16BS |  | 8.5 | 5.4 | 3.18 | 0.4 |
| 40 | V16BS |  | 8.4 | 5.4 | 3.18 | 0.3 |
FAQ
1: Apakah Anda menyediakan sampel? Apakah mereka bebas?
A: Ya, kami menyediakan sampel insert dan mereka gratis jika jumlah insert kurang dari 5 buah, tetapi Anda harus membayar biaya pengiriman ke DHL. Kami juga menawarkan badan pemotong frais gratis jika Anda membeli sisipan frais hingga jumlah tertentu.
2. Apa syarat pembayaran Anda?
J: T/T atau L/C.
3. Apa waktu pengiriman Anda?
A: Biasanya kami akan mengatur pengiriman dalam 7-15 hari.
Hubungi kami
ALAMAT: Taman Industri Lide, Jalan Selatan Huanghe No.78, Zona Tianyuan, Kota Zhuzhou, Provinsi Hunan, Cina 412007
Telepon:0086+15207335549
Telp：0086+731-22332564
Fax：0086+731-22332564
Surel:cwtools@cwprecisiontools.com
Whatsapp/Wechat:0086+15207335549
